Christmas Ribbon with Lights for Tree, Battery Operated LED Ribbon in Gold or Silver, 6.5 to 32.8 Ft

$9.99 USD
$18.60 USD
46% OFF
Shipping fees will be calculated at checkout.
Color
Length

This Christmas ribbon with lights is a sheer ribbon, 1.97 in (5 cm) wide, with tiny LEDs running along its full length and a small AA battery box at one end. Spiral it down the tree or tie a glowing topper bow, and the printed stars and music notes turn into soft silhouettes once it lights up. Choose gold or silver ribbon with warm white or multicolor LEDs, in a 6.5, 16.4 or 32.8 ft length.

Features

  • Lights built into the ribbon: 20, 50 or 100 LEDs depending on length, roughly one every 4 in (10 cm), so the glow runs evenly from end to end.
  • Four looks: gold ribbon with warm white light for a classic golden glow, silver ribbon with warm white, or either ribbon with multicolor LEDs in red, blue, green and pink.
  • Sheer printed ribbon: see-through nylon printed with stars, starbursts and treble clefs, finished with a thin metallic edge in gold or silver.
  • No outlet needed: it runs on AA batteries, so it works on a tree, wreath or centerpiece far from a wall socket.
  • One-button control: a push switch on top of the battery box turns the lights on and off.

Where to Use It

The photos show it wound in a spiral down a full-size tree, gathered into bows at the top and middle of the branches, and draped loosely through a lit tree by a window. Made for indoor holiday decorating, it also suits a staircase garland, a mantel, a wreath or a gift table. The 6.5 ft length is handy for a single bow, a wreath or a tabletop tree; the 16.4 and 32.8 ft lengths give you several turns around a larger tree.

How It Works

Open the battery box and fit AA batteries: two for the 6.5 ft ribbon, three for the 16.4 ft and 32.8 ft ribbons. The outer battery goes in negative end up and the inner one negative end down. Press the switch on top to light the ribbon, then press it again to turn it off. Batteries are not included.

Specifications

  • Ribbon width: 1.97 in (5 cm)
  • Lengths: 6.5 ft (2 m) with 20 LEDs, 16.4 ft (5 m) with 50 LEDs, 32.8 ft (10 m) with 100 LEDs
  • Ribbon color: gold or silver
  • Light color: warm white or multicolor
  • Material: nylon ribbon with LED light string and battery box
  • Power: 2 AA batteries (6.5 ft) or 3 AA batteries (16.4 ft and 32.8 ft), not included

What's Included

One lighted ribbon in the color and length you select, with its battery box attached. The tree, ornaments, gifts and batteries in the photos are styling only.

Frequently Asked Questions

Size and What You Get

How long is each lighted ribbon and how many LEDs does each length carry?

The 6.5 ft (2 m) ribbon has 20 LEDs, the 16.4 ft (5 m) ribbon has 50 LEDs and the 32.8 ft (10 m) ribbon has 100 LEDs. Every length is the same 1.97 in (5 cm) wide, with an LED roughly every 4 in.

How many AA batteries does the ribbon's battery box take?

The 6.5 ft ribbon runs on 2 AA batteries and the 16.4 ft and 32.8 ft ribbons run on 3 AA batteries. Batteries are not included, so have a fresh set ready before decorating.

Look and Materials

What does the silver ribbon look like compared with the gold one when the LEDs are off?

Unlit, the silver ribbon is clear with silver print and a silver edge, while the gold ribbon has a gold tint with gold print and edging. With warm white LEDs on, both glow golden, so the difference shows most in daylight.

Which patterns are printed on the sheer nylon ribbon?

Stars, starbursts, treble clefs and small dots are printed across the see-through nylon. When the LEDs are on, the print shows as dark silhouettes against the glow.

Decorating and Use

Can I tie the light-up ribbon into a bow for the top of the tree?

Yes. The photos show it gathered into a bow for the treetop and into smaller bows hung mid-tree, with the LEDs glowing through each loop. Keep the battery box tucked behind a branch where you can reach the switch.

Which way do the AA batteries face inside the ribbon's battery box?

Fit the outer battery negative end up and the inner battery negative end down, then press the switch on top of the box to turn the ribbon on and press it again to turn it off.

Care and Storage

How do I put the LED ribbon away after Christmas without tangling the wire?

Take the AA batteries out first, then wind the ribbon loosely back into a roll and rest the battery box against the side of the roll so the thin wire is not pulled or kinked.

Recently viewed